{"id":6882941436013,"title":"BrewZilla All Grain Brewing System Gen 4 - 35L\/9.25G (110V)","handle":"brewzilla-all-grain-brewing-system-gen-4-35l-9-25g-110v","description":"WiFi \/ Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal\u003cbr data-mce-fragment=\"1\"\u003eThe top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench\u003cbr data-mce-fragment=\"1\"\u003eMirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter\u003cbr data-mce-fragment=\"1\"\u003eMake larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation\u003cbr data-mce-fragment=\"1\"\u003eMiddle position feet allow you to lift out the malt pipe in two stages. Lift that heavy malt pipe to the middle position first, allow it to drain, then completely lift out the malt pipe for sparging\u003cbr data-mce-fragment=\"1\"\u003ePerforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency\u003cbr data-mce-fragment=\"1\"\u003eElement power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp\u003cbr data-mce-fragment=\"1\"\u003eThe built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve\u003cbr data-mce-fragment=\"1\"\u003eMore RAPT-enabled accessories are coming including the Bluetooth Beacon Thermometer, and future firmware updates can be downloaded to the RAPT Controller itself over the internet\u003cbr data-mce-fragment=\"1\"\u003eWiFi\/Bluetooth Enabled RAPT Controller\u003cbr data-mce-fragment=\"1\"\u003eThe RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBut the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnd the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBut wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFinally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHigh Capacity Malt Pipe\u003cbr data-mce-fragment=\"1\"\u003eWith an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOther features that we love on the BrewZilla malt pipe include the middle row of feet and perforated bottom. By adding a second row of feet to the malt pipe, you can remove it from the boiler in two stages. That first lift on the malt pipe when it’s full can be a heavy task, but with the middle row of feet you can do an initial lift, wait for the wort to drain, then lift it all the way out to completely drain the malt pipe and begin sparging. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eConcave Base with Center Draining\u003cbr data-mce-fragment=\"1\"\u003eLeave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUltra Low Watt Density Elements\u003cbr data-mce-fragment=\"1\"\u003eThe concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEasy Access Built-In Pump\u003cbr data-mce-fragment=\"1\"\u003eThe built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePerfect for Distillation\u003cbr data-mce-fragment=\"1\"\u003eIf you want to expand your lineup of homemade libations to offer Spirits in addition to Ales \u0026amp; Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFeatures:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eGen 4.0\u003cbr data-mce-fragment=\"1\"\u003eStainless steel construction\u003cbr data-mce-fragment=\"1\"\u003e9 gallon total capacity with a finished beer output of 5-6 gallons\u003cbr data-mce-fragment=\"1\"\u003eWiFi\/Bluetooth Enabled RAPT digital temperature controller\u003cbr data-mce-fragment=\"1\"\u003eAutomatic step mashing with 6 programmable stages\u003cbr data-mce-fragment=\"1\"\u003e110V power and plug\u003cbr data-mce-fragment=\"1\"\u003eDual heating elements (1000 watts and 500 watts)\u003cbr data-mce-fragment=\"1\"\u003eStainless steel 1\/2 inch ball valve for gravity draining or transferring via pump\u003cbr data-mce-fragment=\"1\"\u003eImmersion wort chiller included\u003cbr data-mce-fragment=\"1\"\u003eStainless steel malt pipe\/basket\u003cbr data-mce-fragment=\"1\"\u003eStamped in volume markers\u003cbr data-mce-fragment=\"1\"\u003eGlass lid\u003cbr data-mce-fragment=\"1\"\u003eMagnetic drive pump for re circulation, transfers, and cleaning\u003cbr data-mce-fragment=\"1\"\u003eRe circulation arm\u003cbr data-mce-fragment=\"1\"\u003eBottom handle for easy lifting and pouring\u003cbr data-mce-fragment=\"1\"\u003eRubber feet\u003cbr data-mce-fragment=\"1\"\u003eTemperature reads in °F or °C\u003cbr data-mce-fragment=\"1\"\u003e32.75 in H (with re-circulation arm) x 12.5 in D\u003cbr data-mce-fragment=\"1\"\u003eRecommended max. grain bill - 23.5 lbs\u003cbr data-mce-fragment=\"1\"\u003eAlcoEngine Still ready with the purchase of a Distillation Lid\u003cbr data-mce-fragment=\"1\"\u003ePump Specs:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMax Capacity: 2.9–3.1 gal\/min\u003cbr data-mce-fragment=\"1\"\u003eMax Head: 4.9–6.8 ft.\u003cbr data-mce-fragment=\"1\"\u003ePoles: 2\u003cbr data-mce-fragment=\"1\"\u003eVoltage: 110–120V-AC\u003cbr data-mce-fragment=\"1\"\u003eFrequency: 50–60Hz\u003cbr data-mce-fragment=\"1\"\u003ePower: 6 watts\u003cbr data-mce-fragment=\"1\"\u003eCurrent: 60 mA\u003cbr data-mce-fragment=\"1\"\u003eSpeed: 2600–3000rpm\u003cbr data-mce-fragment=\"1\"\u003eDuty Cycle: Continuous\u003cbr data-mce-fragment=\"1\"\u003eCapacitor: 2µF\u003cbr data-mce-fragment=\"1\"\u003eInput\/Output: 13mm barb\u003cbr data-mce-fragment=\"1\"\u003eWater Resistance: IPX2\u003cbr data-mce-fragment=\"1\"\u003eYou Will Need:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e2' of H985 1\/2\" ID Silicone tubing for sparging and draining.\u003cbr data-mce-fragment=\"1\"\u003eTo connect included Chiller: (20') of D1710 1\/2\" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adapter (H508).\u003cbr data-mce-fragment=\"1\"\u003eThese items come in the \u003ca href=\"https:\/\/www.altitudebrew.com\/products\/brewzilla-wort-chiller-connection-kit-1\"\u003eWort Chiller Connection Kit\u003c\/a\u003e, click to add to cart.","published_at":"2022-09-07T14:19:42-06:00","created_at":"2022-09-07T14:19:42-06:00","vendor":"Brewmaster","type":"Beer Making Equipment","tags":["Beer Making Equipment"],"price":79999,"price_min":79999,"price_max":79999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40303352414317,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BrewZilla All Grain Brewing System Gen 4 - 35L\/9.25G (110V)","public_title":null,"options":["Default Title"],"price":79999,"weight":15876,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1359\/5939\/products\/48106.png?v=1662582213","\/\/cdn.shopify.com\/s\/files\/1\/1359\/5939\/products\/48105.png?v=1662582248"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/5939\/products\/48106.png?v=1662582213","options":["Title"],"media":[{"alt":null,"id":21820816457837,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/5939\/products\/48106.png?v=1662582213"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/5939\/products\/48106.png?v=1662582213","width":500},{"alt":null,"id":21820817703021,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/5939\/products\/48105.png?v=1662582248"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/5939\/products\/48105.png?v=1662582248","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"WiFi \/ Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal\u003cbr data-mce-fragment=\"1\"\u003eThe top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench\u003cbr data-mce-fragment=\"1\"\u003eMirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter\u003cbr data-mce-fragment=\"1\"\u003eMake larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation\u003cbr data-mce-fragment=\"1\"\u003eMiddle position feet allow you to lift out the malt pipe in two stages. Lift that heavy malt pipe to the middle position first, allow it to drain, then completely lift out the malt pipe for sparging\u003cbr data-mce-fragment=\"1\"\u003ePerforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency\u003cbr data-mce-fragment=\"1\"\u003eElement power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp\u003cbr data-mce-fragment=\"1\"\u003eThe built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve\u003cbr data-mce-fragment=\"1\"\u003eMore RAPT-enabled accessories are coming including the Bluetooth Beacon Thermometer, and future firmware updates can be downloaded to the RAPT Controller itself over the internet\u003cbr data-mce-fragment=\"1\"\u003eWiFi\/Bluetooth Enabled RAPT Controller\u003cbr data-mce-fragment=\"1\"\u003eThe RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBut the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnd the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBut wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFinally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHigh Capacity Malt Pipe\u003cbr data-mce-fragment=\"1\"\u003eWith an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOther features that we love on the BrewZilla malt pipe include the middle row of feet and perforated bottom. By adding a second row of feet to the malt pipe, you can remove it from the boiler in two stages. That first lift on the malt pipe when it’s full can be a heavy task, but with the middle row of feet you can do an initial lift, wait for the wort to drain, then lift it all the way out to completely drain the malt pipe and begin sparging. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eConcave Base with Center Draining\u003cbr data-mce-fragment=\"1\"\u003eLeave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUltra Low Watt Density Elements\u003cbr data-mce-fragment=\"1\"\u003eThe concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEasy Access Built-In Pump\u003cbr data-mce-fragment=\"1\"\u003eThe built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePerfect for Distillation\u003cbr data-mce-fragment=\"1\"\u003eIf you want to expand your lineup of homemade libations to offer Spirits in addition to Ales \u0026amp; Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFeatures:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eGen 4.0\u003cbr data-mce-fragment=\"1\"\u003eStainless steel construction\u003cbr data-mce-fragment=\"1\"\u003e9 gallon total capacity with a finished beer output of 5-6 gallons\u003cbr data-mce-fragment=\"1\"\u003eWiFi\/Bluetooth Enabled RAPT digital temperature controller\u003cbr data-mce-fragment=\"1\"\u003eAutomatic step mashing with 6 programmable stages\u003cbr data-mce-fragment=\"1\"\u003e110V power and plug\u003cbr data-mce-fragment=\"1\"\u003eDual heating elements (1000 watts and 500 watts)\u003cbr data-mce-fragment=\"1\"\u003eStainless steel 1\/2 inch ball valve for gravity draining or transferring via pump\u003cbr data-mce-fragment=\"1\"\u003eImmersion wort chiller included\u003cbr data-mce-fragment=\"1\"\u003eStainless steel malt pipe\/basket\u003cbr data-mce-fragment=\"1\"\u003eStamped in volume markers\u003cbr data-mce-fragment=\"1\"\u003eGlass lid\u003cbr data-mce-fragment=\"1\"\u003eMagnetic drive pump for re circulation, transfers, and cleaning\u003cbr data-mce-fragment=\"1\"\u003eRe circulation arm\u003cbr data-mce-fragment=\"1\"\u003eBottom handle for easy lifting and pouring\u003cbr data-mce-fragment=\"1\"\u003eRubber feet\u003cbr data-mce-fragment=\"1\"\u003eTemperature reads in °F or °C\u003cbr data-mce-fragment=\"1\"\u003e32.75 in H (with re-circulation arm) x 12.5 in D\u003cbr data-mce-fragment=\"1\"\u003eRecommended max. grain bill - 23.5 lbs\u003cbr data-mce-fragment=\"1\"\u003eAlcoEngine Still ready with the purchase of a Distillation Lid\u003cbr data-mce-fragment=\"1\"\u003ePump Specs:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMax Capacity: 2.9–3.1 gal\/min\u003cbr data-mce-fragment=\"1\"\u003eMax Head: 4.9–6.8 ft.\u003cbr data-mce-fragment=\"1\"\u003ePoles: 2\u003cbr data-mce-fragment=\"1\"\u003eVoltage: 110–120V-AC\u003cbr data-mce-fragment=\"1\"\u003eFrequency: 50–60Hz\u003cbr data-mce-fragment=\"1\"\u003ePower: 6 watts\u003cbr data-mce-fragment=\"1\"\u003eCurrent: 60 mA\u003cbr data-mce-fragment=\"1\"\u003eSpeed: 2600–3000rpm\u003cbr data-mce-fragment=\"1\"\u003eDuty Cycle: Continuous\u003cbr data-mce-fragment=\"1\"\u003eCapacitor: 2µF\u003cbr data-mce-fragment=\"1\"\u003eInput\/Output: 13mm barb\u003cbr data-mce-fragment=\"1\"\u003eWater Resistance: IPX2\u003cbr data-mce-fragment=\"1\"\u003eYou Will Need:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e2' of H985 1\/2\" ID Silicone tubing for sparging and draining.\u003cbr data-mce-fragment=\"1\"\u003eTo connect included Chiller: (20') of D1710 1\/2\" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adapter (H508).\u003cbr data-mce-fragment=\"1\"\u003eThese items come in the \u003ca href=\"https:\/\/www.altitudebrew.com\/products\/brewzilla-wort-chiller-connection-kit-1\"\u003eWort Chiller Connection Kit\u003c\/a\u003e, click to add to cart."}

BrewZilla All Grain Brewing System Gen 4 - 35L/9.25G (110V)

Product Description
$799.99
Maximum quantity available reached.
WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal
The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench
Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter
Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation
Middle position feet allow you to lift out the malt pipe in two stages. Lift that heavy malt pipe to the middle position first, allow it to drain, then completely lift out the malt pipe for sparging
Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency
Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp
The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve
More RAPT-enabled accessories are coming including the Bluetooth Beacon Thermometer, and future firmware updates can be downloaded to the RAPT Controller itself over the internet
WiFi/Bluetooth Enabled RAPT Controller
The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen.

But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability.

And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer!

But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings.

Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road.

High Capacity Malt Pipe
With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose.

Other features that we love on the BrewZilla malt pipe include the middle row of feet and perforated bottom. By adding a second row of feet to the malt pipe, you can remove it from the boiler in two stages. That first lift on the malt pipe when it’s full can be a heavy task, but with the middle row of feet you can do an initial lift, wait for the wort to drain, then lift it all the way out to completely drain the malt pipe and begin sparging. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency.

Concave Base with Center Draining
Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind.

Ultra Low Watt Density Elements
The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy.

Easy Access Built-In Pump
The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet.

If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer.

The Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included.

Perfect for Distillation
If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find.

Features:

Gen 4.0
Stainless steel construction
9 gallon total capacity with a finished beer output of 5-6 gallons
WiFi/Bluetooth Enabled RAPT digital temperature controller
Automatic step mashing with 6 programmable stages
110V power and plug
Dual heating elements (1000 watts and 500 watts)
Stainless steel 1/2 inch ball valve for gravity draining or transferring via pump
Immersion wort chiller included
Stainless steel malt pipe/basket
Stamped in volume markers
Glass lid
Magnetic drive pump for re circulation, transfers, and cleaning
Re circulation arm
Bottom handle for easy lifting and pouring
Rubber feet
Temperature reads in °F or °C
32.75 in H (with re-circulation arm) x 12.5 in D
Recommended max. grain bill - 23.5 lbs
AlcoEngine Still ready with the purchase of a Distillation Lid
Pump Specs:

Max Capacity: 2.9–3.1 gal/min
Max Head: 4.9–6.8 ft.
Poles: 2
Voltage: 110–120V-AC
Frequency: 50–60Hz
Power: 6 watts
Current: 60 mA
Speed: 2600–3000rpm
Duty Cycle: Continuous
Capacitor: 2µF
Input/Output: 13mm barb
Water Resistance: IPX2
You Will Need:

2' of H985 1/2" ID Silicone tubing for sparging and draining.
To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adapter (H508).
These items come in the Wort Chiller Connection Kit, click to add to cart.